TT1 curtain hoist system with manual wire rope drive
TT1 curtain hoist system with manual wire rope drive
TT1 curtain hoist system with manual wire rope drive
Curtain rail with manual cable pull for very large curtains, backdrops, dividing curtains, blackout curtains in film and television studios, multi-purpose halls, stages, theatres, etc.
Even very high and wide curtains can be opened and closed with the direct pulling of the pull rope. The large load-bearing capacity of the TT1 rail profile reduces the necessary suspensions to a minimum, thus saving assembly time and costs.
Technical data and the load table can be found at the bottom of this page after the products.
For the assembly drawings, click on the desired configuration:
When using this configuration, towing cars with overlappers are used. The encroacher carries the curtain about 20cm in front of the train car. In the case of curtains that only move to one side, the pulley of the rope can be covered. This is important for curtains that are supposed to close against a wall, otherwise a gap will remain between the curtain and the wall.
If a curtain with a central opening is moved, an overlap of the curtain parts is achieved even if the rail profile is inserted without overlapping.
The advantage of overlapping with rail profiles lies in the unrestricted overlap path. As a result, large main curtains on stages or very high blackout curtains in particular close safely. However, this configuration is only possible when using the curtain pull to move a center-opening curtain. If you want your curtain to open only to one side and cover the pulleys of the rope at the end of the rail, please use the "Configurations with overlapper".
Aluminum track, black anodizedTrack length 6 mCombination track for use with both internal and external drive cables.Can be used as a hand operated, pull-cord and electric curtain track
Black anodizedFor use with: TT1 pull-cord curtain track system with external cable and electric curtain track system with external cableConsists of: 4 ball bearing carrier rollers, 4 ball bearing
Black anodizedFor use with: TT1 pull-cord curtain track system with external cable and electric curtain track system with external cableConsists of: 20 cm overlap arm, 4 ball bearing carrier rollers,
Black anodizedFor use with: TT1 hand operated curtain track system, pull-cord curtain track system with internal cable and electric curtain track system with internal cable, TT2 hand operated curtain
<p>black anodized Deflets the rope downwards when the rope guide is on the outside Maintenance-free, self-greasing high-chem plastic rollers for rope DM 8mm</p>
Black anodizedFor use with: TT1 hand operated curtain track system, pull-cord curtain track system with internal drive cable, electric curtain track system with internal drive cable, TT2 hand
BlackFor use with: TT1 pull-cord curtain track system with internal drive cable, TT1 electric curtain track system with internal drive cableConsists of: Plastic glide body, worm screwsConnects the
Black anodizedFor use with: All TT1, TT2 and XT3 curtain track systemsConsists of: Base plate, mounting blocksUse: For parallel curtain track placement e.g. overlapping area
SUSPENSION BRACKET FOR OUTSIDE GUIDED CORD TT1-17.0
black anodizedFor use with: TT1 pull-cord curtain track system with external cable, electric curtain track system with external cable, TT2 pull-cord curtain track system with external cable and
black anodizedFor use with: TT1 pull-cord curtain track system with external cable, electric curtain track system with external cable, TT2 pull-cord curtain track system with external cable and
black anodizedFor use with: TT1 pull-cord curtain track system with external cable, electric curtain track system with external cable, TT2 pull-cord curtain track system with external cable and
BlackFor use with: TT1 pull-cord curtain track system with internal and external cable, electric curtain track system with internal and external cable, TT2 pull-cord curtain track system with
Black anodizedFor use with: TT1 pull-cord curtain track system with internal cable, TT2 pull-cord curtain track system with external cableConsists of: Pulley, weight and screwsUse: For tensioning the
Die Werte gelten bei der Anwendung des Mindestradius der Bögen von 100cm und Bogenwinkel von 90°. Überschreitet Ihre Anlage die oben angeführten Standardwerte, dann kontaktieren und Sie uns bitte.
