Spin cable for very large horizons, backdrops, dividing curtains, blackout curtains in film and television studios, multi-purpose halls, stages, theatres, etc.
Even 20m high curtains can be moved manually with ease. The large load-bearing capacity of the TT2 rail profile reduces the necessary suspensions to a minimum, thus saving assembly time and costs.
The TT2 curtain hoist system is configured as a centrifugal hoist in TV and film studios for capturing and moving large studio horizons, in theatre and opera for background curtains, cycloramas and panoramas, as well as in other large venues with similar requirements.
For curtain hoist system TT2 configured as a centrifugal hoist, rail switches are available on request. AÜ 110923
Technical data and the load table can be found at the bottom of this page after the products.
When using this configuration, towing cars with overlappers are used. The encroacher carries the curtain about 20cm in front of the train car. In the case of curtains that only move to one side, the pulley of the rope can be covered. This is important for curtains that are supposed to close against a wall, otherwise a gap will remain between the curtain and the wall.
If a curtain with a central opening is moved, an overlap of the curtain parts is achieved even if the rail profile is inserted without overlapping.
The advantage of overlapping with rail profiles lies in the unrestricted overlap path. As a result, large main curtains on stages or very high blackout curtains in particular close safely. However, this configuration is only possible when using the curtain pull to move a center-opening curtain. If you want your curtain to open only to one side and cover the pulleys of the rope at the end of the rail, please use the "Configurations with Overlap".
Aluminum track, black anodizedTrack length 6 mCombination track for use with external drive cables.Can be used as a hand operated, pull-cord and electric curtain track
Black anodizedFor use with: TT1 hand operated curtain track system, pull-cord curtain track system with internal cable and electric curtain track system with internal cable, TT2 hand operated curtain
Black anodizedFor use with: TT1 hand operated curtain track system, pull-cord curtain track system with internal drive cable, electric curtain track system with internal drive cable, TT2 hand
Black anodizedFor use with: All TT1, TT2 and XT3 curtain track systemsConsists of: Base plate, mounting blocksUse: For parallel curtain track placement e.g. overlapping area
SilverFor use with: TT1, TT2 and XT3 hand operated curtain track systemsConsists of: Ceiling clipUse: Suspension of a TT1, TT2 or XT3 hand operated curtain track
Silver anodizedFor use with: all TT1, TT2 and XT3 curtain track systemsConsists of: Mounting block with M8 threadUse: For mounting attachments in the top groove of the track, can be mounted to the
